Selectați
  • Marca
  • Produs

+40 (316) 311 216

cart
RO România
Selectați
  • Marca
  • Produs

+40 (316) 311 216

cart
RO România

Compania noastră nu este producător, distribuitor autorizat sau reprezentant autorizat al mărcii LABOM în România. Mărcile private și numerele de articol afișate pe acest site web sunt proprietatea deținătorilor respectivi.

LABOM

Vand orice produs din catalog LABOM la preturi bune

Cod furnizor
Descriere
Prețul
CA1100-A3092-H1-T120-K10
Technische Parameter des Druckmessumformers: Typ CA1100 ECO Edelstahlgehäuse und benetzte Teile, Schutzart IP 65 Messbereich minus 1 bis 15 bar Maximaler Druck bis 100 bar Ausgangssignal 4… 20 mA, 2-Draht-Technologie Genauigkeit ≤ 0,5 % 10 bis 30 VDC Anschlussdurchmesser Gewindeanschluss G 1/2 "Medium: Technischer Dampf mit einem Druck von bis zu 10 bar
La cerere
Află prețul
W1020
CHARGES FOR MATERIAL INSPECTION CERTIFICATE per DIN EN 10204 - 3.1
La cerere
Află prețul
CA1110-A3058-H1-T120-K137-HY-W1020-W1223
CA1110 PRESSURE TRANSMITTER COMPACT ECOnomic for diaphragm seal operation, hygienic see data sheet D4-019-6 A3 pressure sensor thin film for gauge pressure 058 measuring range: 0...10 bar, overload limit 20 bar accuracy: Lin./Hyst./Repr. <= 0.5 % of the adjusted measuring range (standard) H1 output signal: 4...20 mA, 2-wire technology T120 electrical connection: circular connector M12 degree of protection: IP 65 / IP 67 K137 process connection: clamp connection DN 1 1/2" / PN 25, ø 50.5 mm per DIN 32676 model C (Tri-Clamp) for pipes per ASME BPE material stainless steel ASTM 316L system filling: Synthetic oil, free of silicon FD1, FDA listed HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm process temperature -10...+140 °C W1020 Components marked acc. to material inspection certificate W1223 per EN 10204-3.1, wetted parts INSPECTION CERTIFICATE DIN EN 10204 3.1 roughness height rating Ra Custom-Tariff-No.: 90262020
La cerere
Află prețul
CA1100-A3092-Q3-H1-T120-K10
PRESSURE TRANSMITTER COMPACT ECOnomic with threaded connection see data sheet D4-019-4 pressure sensor thin film for gauge pressure measuring range: 0...10 bar, overload limit 20 bar accuracy: Lin./Hyst./Repr. <= 0.3 % of the adjusted measuring range output signal: 4...20 mA, 2-wire technology electrical connection: circular connector M12 degree of protection: IP 65 (standard) process connection: G 1/2 B per DIN EN 837-1
La cerere
Află prețul
CE6120-A1060-K1010-T120-H1
COMPACT PRESSURE TRANSMITTER with threaded connection see data sheet D4-020-1 CE6 design: flush mounted diaphragm, with temperature decoupler12 Ex-protection: without0 pressure sensor: piezoresistive for gauge pressureA1 measuring range 0...25 bar, overload limit 60 bar measuring accuracy: linearity error incl. hysteresis < + 0.2 % f.s. accuracy of adjustment < +/- 0.2 % f.s. 060 process connection: threaded connectionK10 nominal width: G1/2 B with O-ring and sealing washer10 gasket material: NBR electrical connection: circular connector M12, IP 65, union nut of polyamide T120 output signal: 4...20 mA, 2-wire technologyH1 Custom-Tariff-No.: 90262020
La cerere
Află prețul
BE4301-C2060-N1520
DRUCKMESSGERÄT mit Rohrfeder und Schaltkontakt, Chemieausführung gemäß Datenblatt D3-025 BE4 Gehäuse: NG 160 nach EN 837-1 S13 Ausführung: IP 65, Prozessanschluss unten0 Ex-Schutz: mit Ex-Schutz1 Prozessanschluss: M 20 x 1,5C2 Anzeigebereich: 0...25 bar060 Schaltkontakt: Induktivkontakt mit Sicherheits-Initiator (SN)N1 Schaltfunktion: 1 x min. Öffnungskontakt + 1 x max. Öffnungskontakt520 Ex-Ausführung für Induktivkontakt: P+F SJ2-SN / SJ3,5-SN PTB 00 ATEX 2049X II 2 G Ex ia IIC T4/T5/T6 Gb Ex-Ausführung (ATEX) für mechanische Geräte: II 2 G c TX, II 2 D c TX elektrischer Anschluss: Anschlussstecker mit Kabelverschraubung M20x1,5 und abnehmbaren Prüfdeckel, Mat. Makrolon
La cerere
Află prețul
BE4301-C2059-N1520
DRUCKMESSGERÄT mit Rohrfeder und Schaltkontakt, Chemieausführung gemäß Datenblatt D3-025 BE4 Gehäuse: NG 160 nach EN 837-1 S13 Ausführung: IP 65, Prozessanschluss unten0 Ex-Schutz: mit Ex-Schutz1 Prozessanschluss: M 20 x 1,5C2 Anzeigebereich: 0...16 bar059 Schaltkontakt: Induktivkontakt mit Sicherheits-Initiator (SN)N1 Schaltfunktion: 1 x min. Öffnungskontakt + 1 x max. Öffnungskontakt520 Ex-Ausführung für Induktivkontakt: P+F SJ2-SN / SJ3,5-SN PTB 00 ATEX 2049X II 2 G Ex ia IIC T4/T5/T6 Gb Ex-Ausführung (ATEX) für mechanische Geräte: II 2 G c TX, II 2 D c TX elektrischer Anschluss: Anschlussstecker mit Kabelverschraubung M20x1,5 und abnehmbaren Prüfdeckel, Mat. Makrolon
La cerere
Află prețul
CA1100-A3088-Q3-H1-T120-K10
PRESSURE TRANSMITTER COMPACT ECOnomic with threaded connection see data sheet D4-019-4 pressure sensor thin film for gauge pressure measuring range: -1...1.5 bar, overload limit 6 bar accuracy: Lin./Hyst./Repr. <= 0.3 % of the adjusted measuring range output signal: 4...20 mA, 2-wire technology electrical connection: circular connector M12 degree of protection: IP 65 (standard) process connection: G 1/2 B per DIN EN 837-1
La cerere
Află prețul
CA1100-A3058-Q3-H1-T120-K10
PRESSURE TRANSMITTER COMPACT ECOnomic with threaded connection see data sheet D4-019-4 pressure sensor thin film for gauge pressure measuring range: 0...10 bar, overload limit 20 bar accuracy: Lin./Hyst./Repr. <= 0.3 % of the adjusted measuring range output signal: 4...20 mA, 2-wire technology electrical connection: circular connector M12 degree of protection: IP 65 (standard) process connection: G 1/2 B per DIN EN 837-1
La cerere
Află prețul
BE4221-A2061-N1100
ECM pressure gauge
La cerere
Află prețul
CA1110-A3058-H1-T120-K144-W4020
DRUCKMESSUMFORMER COMPACT ECO für Food/Pharma/Biotechnik
La cerere
Află prețul
CA1110-A3058-H1-T120-K124-W4020
DRUCKMESSUMFORMER COMPACT ECO für Food/Pharma/Biotechnik
La cerere
Află prețul
CE6120-A1061-K1022-T120-H1-W4020
COMPACT-DRUCKMESSUMFORMER für allgemeine Anwendungen
La cerere
Află prețul
CC6010-A1058-H1-T120-W4020-Z99
DRUCKMESSUMFORMER COMPACT mit Druckmittler
La cerere
Află prețul
GA2500-A2310121-B40-D2-M22-N2-T11-Z1-W4020-W1201-W2673 PA2100-F12-H1
WIDERSTANDS-THERMOMETER Pt100 ohne Schutzrohr
La cerere
Află prețul
BE4301-C2059-N1520-H4
DRUCKMESSGERÄT mit Rohrfeder und Schaltkontakt, Chemieausführung gemäß Datenblatt D3-025 BE4 Gehäuse: NG 160 nach EN 837-1 S13 Ausführung: IP 65, Prozessanschluss unten0 Ex-Schutz: mit Ex-Schutz1 Prozessanschluss: M 20 x 1,5C2 Anzeigebereich: 0...16 bar059 Schaltkontakt: Induktivkontakt mit Sicherheits-Initiator (SN)N1 Schaltfunktion: 1 x min. Öffnungskontakt + 1 x max. Öffnungskontakt520 Ex-Ausführung für Induktivkontakt: P+F SJ2-SN / SJ3,5-SN PTB 00 ATEX 2049X II 2 G Ex ia IIC T4/T5/T6 Gb Ex-Ausführung (ATEX) für mechanische Geräte: II 2 G c TX, II 2 D c TX Überlastsicherung: 1,5fachH4 elektrischer Anschluss: Anschlussstecker mit Kabelverschraubung M20x1,5 und abnehmbaren Prüfdeckel, Mat. Makrolon
La cerere
Află prețul
CX2001-A65
HIGH-TEMPERATURE-PRESSURE TRANSMITTER for high temperature application data sheet: D4-030-E1 CX2 Ex design: TÜV 02 ATEX 1971 X II 1/2G Ex ia IIC T4 Ga/Gb output signal: 4...20 mA, 2-wire technology degree of protection: IP 67 001 A measurement: gauge pressure 65 measuring range 0...250 bar SPECIAL DIAPHRAGM SEAL for high temperature application connection flange: ø 90 mm, with 4 bore holes d = 13 mm and 2 dismantling screws M12 connection of meas. instrument: directly screwed G 1/2 diaphragm material: stainless steel mat.-no. 1.4435 (316L) extention length: h = 91 mm mat. sealing surface/extension stainless steel mat.-no. 1.4404 (316L) system filling: FMH1 operating temperature range: +10...+350 °C Customs-Tariff-No.: 90262020
La cerere
Află prețul
MX1005-A1-B1
Montagesatz MX1005 2 Zylinderschrauben mit Innensechskant nach DIN 912 M 12 x 55, Qualtität A2-70 A1 2 Dichtungen nach DIN 7603 A 27 x 32 AI B1
La cerere
Află prețul
CE6120-A1053-K1014-T120-N2-H1-W1201
Drucksensor 0…1bar 1G
La cerere
Află prețul
GA2700
RESISTANCE THERMOMETER MiniTherm for general application acc. to data sheet T4-014 measuring resistor: Pt100, tolerances per class A per DIN EN 60751 process connection: threaded connection nominal width: G 1/4 A per DIN 3852 temperature detecting element: ø 6 mm, reduced design to ø 4 mm insertion length U1: 30 mm material wetted parts: stainless steel mat.-no. 1.4404 (316L) measuring resistor: 1 x Pt100, 3-wire technology, standard electrical connection: circular connector M12 x 1 (4 pins) operating temperature: -50...+200°C
La cerere
Află prețul
CE6800
CE6800-A1058-K1015-T420-H1-P1 DRUCK - UND TEMPERATURMESSUMFORMER COMPACT von Labom mit frontbündiger Membran CE6800 A1058 / Artikelnummer: CE6800-A1058-K1015-0 T42-H1-P1.
La cerere
Află prețul
CC6020-A1061-H1-T130 DL5110-S1203-HY-A4007-L22-W1020
PRESSURE TRANSMITTER COMPACT for diaphragm seal operation CC6 PRESSURE TRANSMITTER COMPACT for diaphragm seal operation 02 design: with temperature decoupler 0 explosion protection: without A1 pressure sensor piezoresistive for gauge pressure 061 measuring range 0...40 bar, overload limit 100 bar measuring accuracy: linearity error incl. hysteresis < + 0.2 % f.s. accuracy of adjustment < +/- 0.2 % f.s. H1 output signal: 4...20 mA, 2-wire technology T130 electrical connection: circular connector M12, IP 65, union nut of stainless steel DL5 DIAPHRAGM SEAL aseptic-design see data sheet D5-024 1 design: for pipes per DIN 11850 pipe dimension per DIN 11866 table 1 model A 10 DN 25, pipe inside-ø di 26 mm S1203 process connection: DIN 11864-3 type A, clamp connection (coupling side) HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm A400 connection of meas. instrument directly welded 7 material wetted parts: stainless steel mat.-no. 1.4435 (316L) L22 system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered operating temperature range -10...+140 °C W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts
La cerere
Află prețul
CB6010-A1999-H1-K1010-T110
CB6010-A1999-H1-K1010-T110 CB6 COMPACT PRESSURE TRANSMITTER with threaded connection see data sheet D4-020-1 01 design: internal diaphragm 0 explosion protection: without A1 pressure sensor: piezoresistive for gauge pressure 999 measuring range see below -1...17 bar, overload limit 60 bar H1 output signal: 4...20 mA, 2-wire technology K1010 process connection: G1/2 B nach DIN 837-1 material wetted parts - sensor diaphragm, stainless steel mat. no. 1.4404/1.4435 (316L) - socket, stainless steel mat. no. 1.4404/1.4435 (316L) T110 electrical connection: right angle plug acc. to DIN EN 175301-803-A (DIN 43650, model A) IP 65, for cable ø 4...10 mm
La cerere
Află prețul
GA261 0 A4 093 M23 N21 T150 Z52 W2002 PA243 0 F12
La cerere
Află prețul
GA261 0 A4 127 M23 N21 T150 Z52 W2002 PA243 0 F12 H1
La cerere
Află prețul
CV3110
La cerere
Află prețul
CA2110-A1091-H11-T30-K2085-K137-HY-P9-W1020-W1223-W2002
CA2110 PRESSURE TRANSMITTER UNIVERSAL CA for diaphragm seal operation, hygienic see data sheet D4-018-12 A1 pressure sensor: piezoresistive for gauge pressure 091 measuring range -1...9 bar, overload limit 100 bar measuring accuracy: linearity, hysteresis, repeatability <= 0.2 % of span H11 output signal: 4...20 mA, 2-wire technology T30 electrical connection: circular connector M12x1 (4 pin) K2085 design: with temperature decoupler K137 process connection: Tri-Clamp, DN 1 1/2" / PN 25 material stainless steel mat.-no. 1.4404/1.4435 (316L) system filling: Synthetic oil, free of silicon FD1, FDA listed HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm P9 process temperature: see below max. -20...+160°C W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts W1223 INSPECTION CERTIFICATE DIN EN 10204 3.1 roughness height rating Ra W2002 CALIBRATION PROTOCOL: with 5 measuring points # Please note: R88 (electr. connection steplessly rotatable approx. 300°) was discontinued some time ago. # Custom-Tariff-No.: 90262020
La cerere
Află prețul
CE6120-A1053-K1014-T120-H1
Drucksensor
La cerere
Află prețul
CV3110-A1059-F80-H1100-M2-N10-T6-T30-K1085-W4018-W1201 DF36080-HY06-F5-A4007-L23-W4035-W1020-W1223
La cerere
Află prețul
GA2700-HY
GA2700-HY-A1433-C1100-G11-N2-T150 RESISTANCE THERMOMETER MiniTherm for food/pharmaceuticals/biotechnology acc. to data sheet T4-015 measuring resistor: Pt100, tolerances per class A per DIN EN 60751 GA2700-HY process connection: clamp connectionA14 nominal width: Tri Clamp 1" / 1 1/2", ø 50.5 mm33 temperature detecting element: ø 6 mmC1 insertion length U1: 100 mm100 material wetted parts: stainless steel mat.-no. 1.4404 (316L)G11 measuring resistor: 1 x Pt100, 3-wire technology, standardN2 electrical connection: circular connector M12 x 1 (4 pins)T150 operating temperature: -50...+200°C
La cerere
Află prețul
1 2 3 4 5 6 7

Site-ul conține doar o parte a pozițiilor din catalogul LABOM.

Dacă nu ați găsit articolul de care aveți nevoie, trimiteți o cerere la e-mail [email protected] și vă vom trimite cu siguranță o ofertă comercială.

Despre producător

Compania LABOM din Germania are o bogată istorie în industria sa. Fondată cu mulți ani în urmă, a devenit o prezență de încredere în domeniul său. Localizată într-un oraș german, compania se concentrează pe producția unei game variate de produse industriale de calitate. Printre produsele sale se numără o varietate de componente și accesorii industriale esențiale, menite să optimizeze funcționarea echipamentelor industriale. Acestea sunt proiectate pentru a asigura performanțe superioare și eficiență în diferite aplicații industriale.

Aici puteți cumpăra produse ale altor mărci

CAMLogic
Prominent
Pavone Sistemi
BEE
INOR
tender.modal.title
Managerul nostru vă va contacta în curând.
  • Introduceți numele dvs.
  • Introduceți numărul de telefon pentru contact
  • Introduceți adresa de e-mail
  • Acest domeniu nu poate fi gol
  • Acest domeniu nu poate fi gol

Solicitarea a fost trimisă
Solicitarea a fost trimisă
Mesajul nu a fost trimis
Mesajul nu a fost trimis

Trimite o cerere

Vă vom contacta și vă vom răspunde la toate întrebările

  • Introduceți numele dvs.
  • Introduceți numărul de telefon pentru contact
  • Introduceți adresa de e-mail
Vă mulțumim pentru cerere!
În timp ce procesăm solicitarea dvs., puteți găsi alte poziții de care aveți nevoie - avem peste 10.000 de mărci în catalogul nostru! Comandând mai multe articole simultan, veți economisiți semnificativ la livrare!
Catalogul producătorilor Căutare
Ceva n-a mers bine.
Ceva pare să fi greșit. Încercați mai târziu
Închideți mesajul
Folosim cookie-uri. Pentru mai multe informații, consultați Politica noastră de protecție a datelor.
Am înțeles